Hi, this is my first try in this forum. What do you think?
EBU R128 measurements: INT -12.6 LUFS / LRA 9.7 LU / TP -1.0 dB
I aimed at an open sounding mix, whatever that means :-)
Thanks for your comments!
Hi Yoda.Earth, welcome to the forum! Just a couple things:
Your bass guitar has too much information in the 20hz - 50hz area I think, and the kick drum is not cutting through the mix. I would try increasing the kick drum volume a bit and take it from there, maybe some eq. Overall sounding good!
(20-03-2020, 11:41 AM)Eastwood Wrote: [ -> ]Hi Yoda.Earth, welcome to the forum! Just a couple things:
Your bass guitar has too much information in the 20hz - 50hz area I think, and the kick drum is not cutting through the mix. I would try increasing the kick drum volume a bit and take it from there, maybe some eq. Overall sounding good!
Hi Eastwood, thanks for your input!
I did a new version, not sure if I overdid it, since I'm on headphones. I can hear the difference, just don't know how it translates to (big) speakers.
hi-pass on the bass guitar, peaking filter on the base drum.
What do you think?
Kick drum sounding good! I think you might be able to raise the volume on the bass guitar a few dB, it’s a bit too quiet. The kit sounds really rockin now though! I would just make the snare a few dB quieter and I think you’ll be there. Edit: I’m not 100% on the bass/snare volume adjustments, it sounds better on a second listen but those were my first impressions.
Hi Yoda,
I've not mixed this one myself so I don't know about the challenges of this song but after a first listen I agree with Eastwood:
Raise the Bass a bit and lower the Snare and you have a very nice mix!
One question though: Why the EBU R128 measurement? Isn't that relevant for TV content only?
Cheers,
Andi
New mix, with bass up 2dB and Snare down 2 dB :-)
Thank you Devilskater666 and Eastwood for your advice and encouragement!
The EBU R128 now reads: INT -12.3 LUFS and LRA 9.9 LU at -1.0dB TP
I use the EBU R128 because it is integrating over the whole song. So it gives you an idea of overall loudness. It might get used a lot for TV. However, I'm not aware of any standard that applies to music only. Is there one? I'd be very interested to learn about it.
For my own mixes, a loudness range of 9.9 is pretty darn good, but the song is arranged so that it has quieter sections at the beginning and end ... :-)
I always aim at a high range, since I hate those overcompressed songs on pop radio. On the other hand, it's rock'n roll! These two forces make the struggle in mixing a song for me. ;-)