21-03-2018, 06:06 AM
24-04-2018, 03:52 PM
There's a couple of things that presented as trouble areas in this first mix. The shaker was too loud, often masking cymbals and hi-hats in the drum mix. The basses got "boomie" on occasion so low cuts were made at 35Hz and 24dB /octave. There were some sibilant issues in the vocals, and the keyboard parts were buried most of the time. I think I've corrected each of those problems in the mix.
In this master, I believe I'm correcting resonant frequencies, specifically, at about 210Hz I made a sharp cut of about 6dB, Q of 6.293. Likewise, at 2.1kHz there's a sharper cut of 6.25dB, Q of 10.727. The low cut is at 40Hz and 24dB / octave.
Let me know if I've made improvements or need to go back to "the drawing board" and try again.
In this master, I believe I'm correcting resonant frequencies, specifically, at about 210Hz I made a sharp cut of about 6dB, Q of 6.293. Likewise, at 2.1kHz there's a sharper cut of 6.25dB, Q of 10.727. The low cut is at 40Hz and 24dB / octave.
Let me know if I've made improvements or need to go back to "the drawing board" and try again.
25-04-2018, 06:36 AM
Nice job Dave
Listened to it in the headphones and sounds really smooth and solid.
You cleaned it up nicely from the first mix. Sounds like a keeper to me!
Great Job!!
Cheers
K
Listened to it in the headphones and sounds really smooth and solid.
You cleaned it up nicely from the first mix. Sounds like a keeper to me!
Great Job!!
Cheers
K
25-04-2018, 04:26 PM
Thanks, K. I'm starting to learn my EQ lessons, where and how to make space for various instruments to sit in the mix, so less needs to be done at mastering.