Cool vocal delay/effect going on. Overall it's a bit spacey for me, I'd back off most of the effects a notch, particularly the vocal delay. I'm missing the bottom end too, let that kick and bass shine!
18-03-2016, 08:19 AM (This post was last modified: 18-03-2016, 08:20 AM by Shul.)
Hey Gkallergis
I like your mix but the only thing I found tiering is the reverb on that intro guitar throughout the song.
There is a particular frequency ringing there somewhere. (guitar track) Id do a sweep to lower it. (I would also highpass that reverb on it a bit more so that frequency isn't piercing through)
at 2:04 through 2:08 there is a ringing freq. on the right mostly. I'm sure it's the snare causing it and also it's bleeding through the overhead mics. I would do another sweep as well.
I think if you were to fix that guitar ringing problem this would sound SO MUCH better
Hello Shul!
Thank you very much for the feedback!!
I reduced the reverb on guitars and also lowered my high-cut on the reverb a bit. I also EQed out some more snare ringing. I hope I'm moving in the right direction.
One question, when the snare ringing is too broad, is there anything I can do to avoid loosing snare sound in my attempt to cut out the ringing? For example, now the ringing was arount 400-600 and I had to go with a pretty drastic Q to remove most of it so in the process I lost a lot of "good sound", too! Could I just add another EQ to bring it back in? Does this make sense? Or should I just cut with many narrow filters in the first place?