Do Not Stand - Printable Version +- Discussion Zone (http://discussion.cambridge-mt.com) +-- Forum: 'Mixing Secrets' Free Multitrack Download Library: mixing forum (http://discussion.cambridge-mt.com/forumdisplay.php?fid=184) +--- Forum: Electronica, Dance, Experimental, Spoken Word (http://discussion.cambridge-mt.com/forumdisplay.php?fid=3) +---- Forum: Carol Dant: 'Do Not Stand' (http://discussion.cambridge-mt.com/forumdisplay.php?fid=407) +---- Thread: Do Not Stand (/showthread.php?tid=19967) |
Do Not Stand - The Wizzards - 19-08-2017 My mix RE: Do Not Stand - dcp10200 - 26-08-2017 Overall you've got a balanced mix, I like the delay and reverb on the vocal and the smoothness of the low end in the mix. In the drum loop there's some honkiness at 1 kHz tha can be scooped out and the vocals need some cleaning up around 400 Hz, try cutting some 3 kHz out of the loop as well. While the vocal reverb is nice, try making the vocals dry untill the first "Don't Stand" repetition at 0:46, this will allow for some contrast and give some build to the track. I found fading in the first section a touch helps give a little bit of dynamic interest to the track and adding some more different delays further into the track spiced things up. Really I can't say much beyond that, you've got a good canvas to work with in this mix and some simple automation of effects and other things can really make this track. Cheers and hope this helps, Doug |