Thread Rating:
  • 8 Vote(s) - 4.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tips & tricks for mixing 'Burning Bridges'
#11
Hi Blitzzz what do you think of my mix, i would like your comments.

http://discussion.cambridge-mt.com/showt...?tid=23094
Reply
#12
(16-08-2014, 08:48 PM)Blitzzz Wrote: Hello,

after writing a lot of comments lately I decided to put up an FAQ about this song.

Who are you:
I´m one of the guitar players of this band and responsible for mixing/recording.

How did you record this song:
Burning Bridges has completely been written and recorded over the internet. We use dropbox to store & sync all files so every band member always has the same version of the song on his harddisk. We are all using Cubase 7.
We recorded the guitars clean and reamped them with my Kemper Amp. The profile we use is a "copy" of the guitar sound of "My Curse" from Killswitch Engage. If you have a kemper you can download it from the database for free. You can listen to the profile here: https://soundcloud.com/darkridemetal/mycurse-kemper1
The riff runs 4 times and is changing between the original Killswitch sound (1st & 3rd run) and my Kemper Profile (2nd & 4th).
For Drums we use Superior Drummer because it's too expensive to get a good drum sound without a proper room and good mics. The bass is an active 5-string Fender Jazz Bass played straight into the audiointerface. I use the Microtubes B3K for bass distortion. Our singer has his own studio so I don't know what kind of mics and gear he has used =)

Are there any reference mixes you recommend?
Yes - all songs on "As daylight dies" & "End of Heartache" from Killswitch Engage. Notice how "warm" their guitar sound is compared with Bands like Machine Head or Trivium.
http://youtu.be/Vn3WKmyprEo?t=12s
https://www.youtube.com/watch?v=iPW9AbRMwFU
And here is another mixed & mastered song from Darkride for reference:
https://soundcloud.com/darkridemetal/dogs-of-war

How should I mix this song?
You are free to mix this song in ANY direction you want. the problem is that most people use eq and compression on every track because the think they HAVE to. instead of building some sort of climax, paying attention to small details and making every chorus more powerful then the one before they are mixing individual tracks with "their" guitar/snare/bass sound in mind and completely forget about the fact that mixing is way more then EQ and compression. E.g. somebody told you that a 3db boost at 3khz and a 3db cut a 1khz is a good idea for distorted guitars. While this can be a good move sometimes you should not apply this "rule" to every guitar just because somebody said so. Use your ears. I can promise you that I didn't record the guitars like they are if I wanted a sound like Machine Head. No - I wanted the guitars to exactly sound like this. Same goes for the bass and drums. Find a way to make it all work without changing the "sound" of the band.

Any other tips?
Load, sort and route all tracks of Burning Bridges into a new project and pull up all the faders so that your master PEAKS at -2/-3 db. Don't forget about gain staging - make sure all the levels of the individual tracks are right in the first place. Now take your time and listen to the mix. What sounds arkward? What sounds great? Does the song have a climax? Does every verse sound the same? (if yes = bad). Is there anything special that you want to highlight in the mix like a nice drum roll or really cool background vocals? While listening to the mix you should pull down faders of tracks that are too loud. Make hi/lo cuts and pan the tracks and listen again. Don't use ANY sort of EQ or compression at all, just use the faders. If you constantly have to adjust the volume of a track throughout the song you probably have to fix it with a compressor or - the better choice - with volume automation. You will end up with a good rough mix and NOW you can decide if you want to seperate clashing instruments via EQ or fader moves. But keep in mind that you don't want to change the sound of the band - just give it more definition.

Summary: you can get a rough mix of this song with little to no eq und compression and it will sound good. just concentrate on hi/lowcuts and do some fader rides. Vocals need some de-essing? Cool, do it. Add SMALL amounts of delay and reverb to the solo guitars and the lead vocals and you're done with the basic stuff. NOW you can start mixing the song, give it impact, give it power, let the solo guitars scream! Everything you did before was just a warm up for the real job. And don't ruin your balanced and powerful mix with an Ozone preset just to make it loud Smile

Have fun,
blitzzz

Helpful tips, thanks! Just uploaded my mix, hopefully someone still visits this thread Big Grin
Reply