Violent Bliss - Voiceless Siren

[filipandrei]

Great tune and the bass is killer 
Please crank the volume, as it sits around -14 LUFS 
Any feedback or comments are, as always, welcome.

Cheers

[crownoise]

Its a good mix mate yes a tiny more volume could be benifitial but not a huge problem. A bit to much highs from the ride/ohs in the right channel i think though? I actually clipped my mix about 6 db over the 0 haha .

[filipandrei]

Hey crownoise, thanks a lot.
You're 100% correct about the right channel, I think it's the older version of an un-edited floor-tom! (thanks for the observation)

[filipandrei]

Correcting and cleaning the Floor-Tom track, new minor adjustments and a "mastering" session
Hope it turned out fine!

Cheers

[Artem]

Correcting and cleaning the Floor-Tom track, new minor adjustments and a "mastering" session
Hope it turned out fine!

Cheers

Hi! I am a bass player from this band. The guitars are misaligned in the multitrack due to my fault. I am feeling shame about that but thanks for mixing. Our band is grateful for your work. If you will correct it in your mix, that would be cool. Here are the corrected tracks https://drive.google.com/drive/folders/1...sp=sharing . Sorry again and thanks!

and special thanks for appreciating my work as a bassist. Glad to hear that =)

[filipandrei]

Artem,

Thanks a lot, and also thank the band!
Here's my correction for the mix.

Cheers

[Artem]

Artem,

Thanks a lot, and also thank the band!
Here's my correction for the mix.

Cheers

I like the way the drums sound and the mix is pretty balanced overall. Perhaps there are a little more high frequencies on the overheads than necessary, but this is a matter of taste. I would also like to hear sound design and work with automation. Maybe some brighter delays in certain places, maybe some distortion somewere on the vocal track. Thank you very much for your work

[crownoise]

I like the v2r02m the most , better volume.

[filipandrei]

Thanks guys for listening and for your feedback
@Artem, I'll try some sound design, and you might be right about the high frequencies.
Recently I've changed my listening environment, using now Sonarworks SoundID Reference, and I'm still in a learning process

@crownoise
I'll try a "mastering" level output, although I'm pretty sure I'm not good at doing this stuff

Cheers