25-12-2021, 12:50 AM
(This post was last modified: 28-12-2021, 11:40 AM by billabong68.)
Hi,
my key thoughts and processing on this:
- I upsampled the stem to 88kHz. Not sure how much that does, but wanted to try that out.
- Transient dampening was first step, 2dB to get the pluckiness reduced. Neutron 3 Transient Shaper (very transparent)
- Two dips at 100 and 200 to remove masks (PSP Infiniti Strip)
- Opto Compressor with fast release (same)
Sends
- Widener (stereo delay) as a send
- 3 reverbs on send to shape the space: Ambience (M7 small wooden room), Chamber (M7 ambience chamber B) and Plate (Abbey Road plate C).
Buss processing
- Ducking the reverb with a side chain compressor
- Stereo widening
- Bus compression: Logic Opto and Soundspot Cyclone in series (1.5 dB each) to glue things together
I would love to hear how other people processed this!
my key thoughts and processing on this:
- I upsampled the stem to 88kHz. Not sure how much that does, but wanted to try that out.
- Transient dampening was first step, 2dB to get the pluckiness reduced. Neutron 3 Transient Shaper (very transparent)
- Two dips at 100 and 200 to remove masks (PSP Infiniti Strip)
- Opto Compressor with fast release (same)
Sends
- Widener (stereo delay) as a send
- 3 reverbs on send to shape the space: Ambience (M7 small wooden room), Chamber (M7 ambience chamber B) and Plate (Abbey Road plate C).
Buss processing
- Ducking the reverb with a side chain compressor
- Stereo widening
- Bus compression: Logic Opto and Soundspot Cyclone in series (1.5 dB each) to glue things together
I would love to hear how other people processed this!