well, here is my try to make this muddy kind of music more "hearable", while using all 43 tracks.
used tools:
a 30-day trial of presonus studio one 2 x64
(i´ve used no third party tools, just the pure DAW)
drums:
*kick - limiter, comp, EQ
*snare/toms - comp, EQ
*rest of the kit - EQ
*samples - no FX
drum-bus: just a very little reverb
bass:
*bass DI - comp, ampire (with 8x10 cab sim, crybaby wah, little tubedriver, EQ & verb)
*bass miced - no FX
bass- bus: no FX
synth:
*strings - comp, expander, EQ, rev & auto pan
*coir - bandcomp, EQ, ampire (with decent drive to get the choir better integrated in the sound, otherwise the entry of this track was to harsh & cutting)
vox:
*leadvox -no fx
*leadvoxdbl - comp, eq, dealy, ampire
*bvox1 - comp, EQ, ampire paned full left
*bvox2 - comp, rev paned full right
vox-bus - EQ
guit:
the hardest part imho the miced sound was so muddy so i decided to reamp the DI signals and use the miced ones only as support, mixed in just a little. attempted to mix it in a way you nearly can´t hear them when they are running but you will miss some bottom when they are muted.
*guitDI 1-4 - comp, ampire (paned hard left/right) using two different amp types and individual EQing
*guit DI 5-6(lead) - eypander, ampire, chorus (paned hard left/right)
guit DI bus - EQ
*guitmic1/2 (1-6) - no FX
guit mix bus - no FX
this is my secend song at all. so i´ll hope you enjoy it :-)
thrasher
p.s. ampire is a studio one built in amp/cab/stompbox simulation
used tools:
a 30-day trial of presonus studio one 2 x64
(i´ve used no third party tools, just the pure DAW)
drums:
*kick - limiter, comp, EQ
*snare/toms - comp, EQ
*rest of the kit - EQ
*samples - no FX
drum-bus: just a very little reverb
bass:
*bass DI - comp, ampire (with 8x10 cab sim, crybaby wah, little tubedriver, EQ & verb)
*bass miced - no FX
bass- bus: no FX
synth:
*strings - comp, expander, EQ, rev & auto pan
*coir - bandcomp, EQ, ampire (with decent drive to get the choir better integrated in the sound, otherwise the entry of this track was to harsh & cutting)
vox:
*leadvox -no fx
*leadvoxdbl - comp, eq, dealy, ampire
*bvox1 - comp, EQ, ampire paned full left
*bvox2 - comp, rev paned full right
vox-bus - EQ
guit:
the hardest part imho the miced sound was so muddy so i decided to reamp the DI signals and use the miced ones only as support, mixed in just a little. attempted to mix it in a way you nearly can´t hear them when they are running but you will miss some bottom when they are muted.
*guitDI 1-4 - comp, ampire (paned hard left/right) using two different amp types and individual EQing
*guit DI 5-6(lead) - eypander, ampire, chorus (paned hard left/right)
guit DI bus - EQ
*guitmic1/2 (1-6) - no FX
guit mix bus - no FX
this is my secend song at all. so i´ll hope you enjoy it :-)
thrasher
p.s. ampire is a studio one built in amp/cab/stompbox simulation