In the other mix I did not compress many instruments as they should be.
The bass carries a compression of 20: 1 and apart a multiband to control well those low frequencies that protrude from the mix.
And for this type of music you need very high compressions. Especially in the low areas, even with electric guitars in this case.
Very different from synthesizers that do not need so much compression.
Recordings usually need more compression since they sometimes pick up unwanted frequencies.
This is my new mix without master
Maybe what I have left to do is mitigate the HH a little, but I think it is now correct
And listening to your mix. The drums are crushed and without dynamics, the kick sounds like Trash metal and it's a rock song. And the bass needs a lot of compression and attenuate it over 150hz.
The bass carries a compression of 20: 1 and apart a multiband to control well those low frequencies that protrude from the mix.
And for this type of music you need very high compressions. Especially in the low areas, even with electric guitars in this case.
Very different from synthesizers that do not need so much compression.
Recordings usually need more compression since they sometimes pick up unwanted frequencies.
This is my new mix without master
Maybe what I have left to do is mitigate the HH a little, but I think it is now correct
And listening to your mix. The drums are crushed and without dynamics, the kick sounds like Trash metal and it's a rock song. And the bass needs a lot of compression and attenuate it over 150hz.
Compresor de bus SSL, Gates Sta-Level, Dbx 160x, UA 1176, Bae 1073, Lomo Up27, Ear 822Q, IGS Tubecore Mastering Edition, Lexicon PCM 70, Ferrofish A16, SSL Six, Studer Revox B77, Yamaha HS8