EnDance_Open Mix - Printable Version +- Discussion Zone (http://discussion.cambridge-mt.com) +-- Forum: 'Mixing Secrets' Free Multitrack Download Library: mixing forum (http://discussion.cambridge-mt.com/forumdisplay.php?fid=184) +--- Forum: Alt Rock, Blues, Country Rock, Indie, Funk, Reggae (http://discussion.cambridge-mt.com/forumdisplay.php?fid=5) +---- Forum: Dunning Kruger: 'EnDance' (http://discussion.cambridge-mt.com/forumdisplay.php?fid=162) +---- Thread: EnDance_Open Mix (/showthread.php?tid=19975) |
EnDance_Open Mix - jimmyklane - 19-08-2017 I left all the mics open for a "band in a room" type sound, as opposed to expanding all the drums and guitar parts....I just didn't care for the "tight" sound on this song. I know it needs quite a bit of work...this represents 30 minutes of my time, and the vocals are probably too hot. Please: any and all criticism is welcome! -Jim RE: EnDance_Open Mix - jimmyklane - 20-08-2017 This has the room mics cut out, along with all of the reamped guitars....I reamped them myself here at home, some digital, some with real amps. I also added a touch of wet to the vocal and hit a limiter to give it a haircut of about 3dB. RE: EnDance_Open Mix - thedon - 22-08-2017 Hi Jimmy Thanks for the feedback , Listened to both versions ,revision 2 works for me ,Good job with the guitar tones and vocals . I think you have done a great job on a chalenging multi tracks for me anyway. The drums are really good challenge can hear a lot of wooshy Hi hats or cymbals around 500-600 hz area coming from the overheads and especially the snare track which lacks punch and body . I cheated and took the easy way out replacing the snare track with a sample to give more body and reduce some cymbal bleed . Nice work . Cheers |