+- Discussion Zone (http://discussion.cambridge-mt.com)
+-- Forum: 'Mixing Secrets' Free Multitrack Download Library: mixing forum (http://discussion.cambridge-mt.com/forumdisplay.php?fid=184)
+--- Forum: Rock, Punk, Metal (http://discussion.cambridge-mt.com/forumdisplay.php?fid=6)
+---- Forum: Impossible Colours: 'Dune Rider' (http://discussion.cambridge-mt.com/forumdisplay.php?fid=192)
+---- Thread: Hello forum members here is my mix (/showthread.php?tid=1416)
Pages:
1
2
RE: Hello forum members here is my mix - takka360 - 25-04-2013
Switch phase on one and see how that goes ,you could also try something like transient Designer to see if that helps
RE: Hello forum members here is my mix - Silenus - 25-04-2013
its difficult to pinpoint because there is heavy bleeding from all Drum Mics.
RE: Hello forum members here is my mix - Silenus - 25-04-2013
where should I place the transient Designer in the effect chain ?
the new mix - Silenus - 25-04-2013
I used the envelope shaper on the SD and inverted the phase of one of the overheads.
RE: Hello forum members here is my mix - takka360 - 25-04-2013
Yes but i dont remember the snares being a problem on this track.You could also try a gate.you are welcome to try my children snare i have uploaded it here
Well i tried but it woint upload i dont know why.
Ah its done it now,its not a wav but will be fine if you want to use it or play around with it or bin it its up to you
RE: Hello forum members here is my mix - Silenus - 25-04-2013
I used gate on all drums when possible .
RE: Hello forum members here is my mix - takka360 - 26-04-2013
Sorry i must be loosing it i sent you the wrong snare lol