'Believe' Flow Taylor Mix - Printable Version +- Discussion Zone (http://discussion.cambridge-mt.com) +-- Forum: 'Mixing Secrets' Free Multitrack Download Library: mixing forum (http://discussion.cambridge-mt.com/forumdisplay.php?fid=184) +--- Forum: Rock, Punk, Metal (http://discussion.cambridge-mt.com/forumdisplay.php?fid=6) +---- Forum: I Am Cassettes: 'Believe' (http://discussion.cambridge-mt.com/forumdisplay.php?fid=323) +---- Thread: 'Believe' Flow Taylor Mix (/showthread.php?tid=12235) |
'Believe' Flow Taylor Mix - FlowTaylor - 29-09-2015 Hey Guys, this is my mix. i really tried to bring out the power and dynamics of this song. it was a lot of fun to mix. the bass and drums are going nuts here. any creative input is very welcome! RE: 'Believe' Flow Taylor Mix - Andreas Tyranopoulos - 02-10-2015 Hello, I like your mix! I think you have done a very good job. I would only like to hear a little cleaner the bass guitar and the kick. There is something wrong in the low end. RE: 'Believe' Flow Taylor Mix - FlowTaylor - 06-10-2015 (02-10-2015, 12:54 PM)Andreas Tyranopoulos Wrote: Hello, I like your mix! I think you have done a very good job. I would only like to hear a little cleaner the bass guitar and the kick. There is something wrong in the low end. Thank you. I appreciate your comment. could you be more specific what you mean with 'something wrong in the low end'? it seems to be fine from where i am listening; headphones, acousticly treated room.. maybe you can help me understand better what you mean. that would be awesome! RE: 'Believe' Flow Taylor Mix - Andreas Tyranopoulos - 06-10-2015 As I hear it on my monitors it seems like your kick and bass have a lot of low-mid frequencies. That makes the mix a little muddy. I think a good idea would be to cut a lot of 400-700hz on the kick and add some db's around the 8khz. Also try to cut some 200-300 Hz on the bass and add some db's on the 1khz. I think that way the low end on your mix will be much more clear. I hope to help you. I would like to hear a new version with these changes or something close to that. RE: 'Believe' Flow Taylor Mix - FlowTaylor - 07-10-2015 (06-10-2015, 06:28 PM)Andreas Tyranopoulos Wrote: As I hear it on my monitors it seems like your kick and bass have a lot of low-mid frequencies. That makes the mix a little muddy. I think a good idea would be to cut a lot of 400-700hz on the kick and add some db's around the 8khz. Also try to cut some 200-300 Hz on the bass and add some db's on the 1khz. I think that way the low end on your mix will be much more clear. I hope to help you. I would like to hear a new version with these changes or something close to that. here is a new version with the changes you suggested. you were straight on man. seems to be clearer now and i could even push the low end some more. thanks a lot!! RE: 'Believe' Flow Taylor Mix - Andreas Tyranopoulos - 07-10-2015 Hey I think now it sounds much more powerful! I am very glad that you found my suggestions useful! Keep on mixing!! RE: 'Believe' Flow Taylor Mix - ZikiziraX - 07-10-2015 Bro, awesome. Totally clean, is achieved hear all the instruments. I just thought very dry battery with few acute. But otherwise all ok! Add me! RE: 'Believe' Flow Taylor Mix - Ak3r - 12-10-2015 Nice mix man. I agree with the "too dry drum"...keep the room tracks a lil lower and find a nice reverb that pastes nicely with the drums. Also the bass could have a lil more low end and less attack...did u compress it?...Just that. I hope that helps Cheers. Ak3r RE: 'Believe' Flow Taylor Mix - FlowTaylor - 13-10-2015 Hey Guys, Thanks! I agree on the Drums. They could easily use some more room or verb. it was just a decision of taste. just wanted them real dry for some reason, but i can totally feel the verb too now. Cheers! RE: 'Believe' Flow Taylor Mix - FlowTaylor - 13-10-2015 (07-10-2015, 09:52 PM)ZikiziraX Wrote: Bro, awesome. Thanks! You are added! |